Seabrook, Texas

Paint protection.

Protect the paint. Enjoy the drive.

XPEL paint protection film for vehicles near Seabrook, installed at our Friendswood studio. Compare all five coverage packages, gloss and satin finishes, colored PPF, and the installation approach that fits your vehicle.

XPEL paint protection film installation on a BMW M3 wagon at Bouley Detailing
Installation work at Bouley Detailing’s Friendswood studio.

Understanding the protection

What is paint protection film?

Paint protection film, or PPF, is a transparent urethane film applied over your vehicle’s painted surfaces. Think of it as a replaceable barrier between your paint and the road. It helps absorb wear from stone chips, light scratches, and road debris on the panels it covers.

At our Friendswood studio, Bouley Detailing installs XPEL paint protection film with coverage and finishing matched to your vehicle. Preserve the original gloss, explore a satin finish, or discuss a color transformation while helping protect the paint underneath.

PPF is a sacrificial layer, not a guarantee against every impact. XPEL’s self-healing topcoat can recover from minor surface scratches with heat; deep cuts, punctures, dents, and damage through the film do not self-heal.

PPF packages · Seabrook

Find your coverage.

Five levels. One standard of care.

Porsche 911 front bumper paint protection film coverage

Level 1

Front Bumper

Starting at $749

Start with the most exposed surface.

Coverage includes

  • Front bumper
Get a front bumper quote
Porsche 911 front bumper and full hood paint protection film coverage

Level 2

Partial Front

Starting at $1,499

Protect your bumper. Preserve your hood.

Coverage includes

  • Full front bumper
  • Full hood
Get a partial front quote
Porsche 911 full front PPF coverage including hood, fenders, and mirrors

Level 3

Full Front

Call for pricing

Comprehensive coverage for the front of your car.

Coverage includes

  • Full front bumper
  • Full hood
  • Full front fenders
  • Mirrors
Get a full front quote
Porsche 911 Highway PPF coverage with full front, mirrors, rocker panels, lower doors, A-pillars, and front roof

Level 4

Highway

Call for pricing

Beyond the front end. Ready for the road.

Coverage includes

  • Full front bumper, hood, fenders, and mirrors
  • Rocker panels and lower doors
  • A-pillars and front portion of roof
Get a highway quote
Porsche 911 full body paint protection film coverage

Level 5

Entire Vehicle

Call for pricing

Our most complete protection. From every angle.

Coverage includes

  • Hood, roof, trunk, and A-pillars
  • Front and rear bumpers
  • Front and rear fenders
  • Front and rear doors
  • Mirrors
Get an entire vehicle quote

Starting prices vary by vehicle, film selection, and installation method. Your quote confirms the exact panels, edges, preparation, and scope of work. Coverage diagrams are a guide; vehicle shapes and panel layouts vary.

PPF for Seabrook

Coverage and cleaning work together.

Enjoy the drive. Keep a care plan.

For a Seabrook vehicle used near the coast, discuss both physical protection and ongoing cleaning. PPF targets impacts and wear on covered panels; it should not be treated as a substitute for washing away salt residue or other contamination.

Consider how you want the vehicle to look as well as where it needs protection. Clear gloss and satin film serve different appearance goals, while the panel list determines the actual coverage. We explain both parts before you select a package.

Before you request a quote.

Send your vehicle’s year, make, and model, the panels you want protected. Mention your usual parking and driving routine around Seabrook. We confirm the product, preparation, coverage, and price before installation.

Film options

Your paint. Your finish.

Ferrari F430 with gloss paint protection film at Bouley Detailing

Gloss

XPEL ULTIMATE PLUS

Clear protection that lets your original paint color and gloss take the spotlight. Choose targeted coverage or a more complete installation around the finish you want to preserve.

Lamborghini Huracan STO with XPEL STEALTH satin paint protection film

Satin

XPEL STEALTH

A smooth satin finish for a different expression of the same vehicle. Ask about full-body coverage and panel transitions for a consistent finish.

XPEL COLOR PPF

A new color. The same love for your paint.

Change the look of your vehicle while helping protect its original paint. We offer XPEL COLOR paint protection film at our Friendswood studio. Review the available colors, then confirm your choice with a physical sample; screen colors are only a guide.

Find your color.

  • Yellow
  • Molten Orange
  • Monza Red
  • Satin Thermal Beige
  • Satin Battle Green
  • Moss Green
  • South Beach Blue
  • Satin Abyss Blue
  • Ultra Plum
  • Bond Silver
  • Heritage Grey
  • Satin Tarmac
  • Obsidian Black
  • Satin Midnight Black
  • Grey Black
  • Pearl White

Screen colors are a guide. Confirm your choice with a physical XPEL sample. Color availability and installation pricing are confirmed with your quote.

Film suitability, availability, coverage, and installation pricing are confirmed with your quote.

Installation options

Two approaches. The same care.

Choose the finish that fits your vehicle and expectations.

Porsche 991 GT3 RS with full body custom paint protection film at Bouley Detailing
Full body custom PPF work at Bouley Detailing.

Everyday protection

Standard Kit

Vehicle-specific patterns provide coverage for the panels in your chosen package. Edges are wrapped where the pattern allows, including applicable hood and inner fender edges.

The goal is dependable paint protection without the added cost of extensive custom edge work. A practical choice for daily-driven vehicles and owners seeking quality coverage.

A near-invisible finish

Hybrid Custom

Custom adjustments, additional edge wrapping, and disassembly where necessary help make the film as discreet as possible. This approach provides approximately 5% more coverage than the Standard Kit, depending on the vehicle and panels.

The additional fitting and finishing take significantly longer. This is suited to exotic vehicles, track vehicles, and owners who prioritize the most discreet finish practical.

Both methods use professional film and careful preparation. Panel design and access determine what is practical; not every edge can be wrapped. We discuss visible edges and any disassembly before installation.

Paint preparation

Preserve what matters.

We inspect the paint, previous repairs, existing film, and contamination before installation. Paint correction is not automatically required: PPF adhesive can conceal many fine swirl marks and light surface scratches without polishing first. The film conceals these marks rather than removing them.

Our preference is to preserve original clearcoat where polishing is unnecessary. Deeper scratches, chips, repaired panels, and failing paint need individual assessment and may remain visible. We explain any recommended preparation before agreeing to the work.

Our PPF process

Care at every step.

Thoughtful preparation. Precise fitting. Personal attention.

  1. 01 Prepare

    Hand wash and decontaminate the surfaces so the film starts with a clean foundation.

  2. 02 Refine

    Inspect the paint and discuss any preparation needed before covering existing imperfections.

  3. 03 Fit

    Apply and align the film using the installation method and panel coverage selected for your vehicle.

  4. 04 Inspect

    Review the finish and edges, then walk you through curing and care before pickup.

After installation

Keep your protection performing.

Follow the curing and first-wash instructions supplied at pickup. Wash gently, remove contamination promptly, and avoid directing high-pressure water at film edges. Contact us if you notice lifting or damage rather than attempting a repair yourself.

A film-compatible ceramic coating can be considered for easier ongoing cleaning. It complements PPF rather than replacing the film’s physical protection. Ask us to identify the coated surfaces and suitable products in your proposal.

PPF for Seabrook

Common questions.

Which PPF package should I choose?

Start with the areas exposed to the way you drive. Front Bumper targets a high-impact surface. Partial Front adds the full hood; Full Front also includes the front fenders and mirrors. Highway extends coverage to lower panels and other exposed areas. Entire Vehicle is our most comprehensive option. We confirm the specific panel list for your vehicle.

How much does PPF cost for vehicles near Seabrook?

Front Bumper starts at $749 and Partial Front starts at $1,499. Contact us for Full Front, Highway, or Entire Vehicle pricing. Your vehicle, film, preparation, and Standard Kit or Hybrid Custom installation method determine the final quote.

How long will installation take?

Front bumper coverage can be ready for same-day pickup, while a full-body Hybrid Custom installation can take up to 10 days. The actual schedule depends on your vehicle, coverage, and preparation. We confirm the estimated pickup date when scheduling at our Friendswood studio.

Is paint correction required before PPF?

Usually, no. The film adhesive can conceal many fine swirls and light surface scratches while preserving clearcoat that would otherwise be removed through polishing. It does not repair chips, deep scratches, or failing paint. We inspect the vehicle and explain any preparation needed.

Can I choose satin or colored PPF?

Yes. Discuss XPEL STEALTH for a satin finish or XPEL COLOR for a color transformation. Coverage, panel transitions, product availability, and the selected color or finish are confirmed before installation.

Will I see the film edges?

Clear film is designed to preserve the appearance of the paint, but seams and edges can be visible depending on panel shapes, lighting, and the installation method. Hybrid Custom includes more tailored fitting where practical; not every edge can be wrapped.

What does XPEL’s warranty cover?

XPEL ULTIMATE PLUS and STEALTH have a manufacturer limited warranty covering specified film defects, subject to applicable terms. This is separate from protection against every impact or damage from misuse and improper care. Ask us for the written warranty details for your selected film.

Can PPF replace ceramic coating?

They address different priorities. PPF provides a physical barrier on covered panels. Ceramic coating supports gloss and easier maintenance. You can choose either service or combine them with products suited to the surfaces being treated.

One dedicated studio

Your vehicle.
Our full attention.

Serving Seabrook from our Friendswood studio. Speak with the team that will care for your vehicle.

Bouley Detailing

4402 Rex Road, Suite J
Friendswood, TX 77546

Monday–Friday · 9:00 AM–5:00 PM
Saturday–Sunday · Closed

(979) 264-9793
Arrange your visit →

More protection for Seabrook.

Already protected? Follow the service-specific care guidance supplied at pickup and explore our aftercare resource.