Level 1
Front Bumper
Starting at $749
Start with the most exposed surface.
Coverage includes
- Front bumper
Webster, Texas
Protect the paint. Enjoy the drive.
XPEL paint protection film for vehicles near Webster, installed at our Friendswood studio. Compare all five coverage packages, gloss and satin finishes, colored PPF, and the installation approach that fits your vehicle.
Understanding the protection
Paint protection film, or PPF, is a transparent urethane film applied over your vehicle’s painted surfaces. Think of it as a replaceable barrier between your paint and the road. It helps absorb wear from stone chips, light scratches, and road debris on the panels it covers.
At our Friendswood studio, Bouley Detailing installs XPEL paint protection film with coverage and finishing matched to your vehicle. Preserve the original gloss, explore a satin finish, or discuss a color transformation while helping protect the paint underneath.
PPF is a sacrificial layer, not a guarantee against every impact. XPEL’s self-healing topcoat can recover from minor surface scratches with heat; deep cuts, punctures, dents, and damage through the film do not self-heal.
PPF packages · Webster
Five levels. One standard of care.
Level 1
Starting at $749
Start with the most exposed surface.
Level 2
Starting at $1,499
Protect your bumper. Preserve your hood.
Level 3
Call for pricing
Comprehensive coverage for the front of your car.
Level 4
Call for pricing
Beyond the front end. Ready for the road.
Level 5
Call for pricing
Our most complete protection. From every angle.
Starting prices vary by vehicle, film selection, and installation method. Your quote confirms the exact panels, edges, preparation, and scope of work. Coverage diagrams are a guide; vehicle shapes and panel layouts vary.
PPF for Webster
Keep the daily drive in mind.
If your Webster routine involves frequent trips through busy roads and shared parking areas, tell us where the vehicle actually shows wear. Front-end film addresses road impacts on covered paint; broader coverage may be worth discussing when preserving the entire finish is the priority.
For a vehicle you depend on each day, scheduling matters as much as the package. Contact our Friendswood studio before arranging drop-off so we can confirm the inspection, preparation, and installation scope together.
Send your vehicle’s year, make, and model, the panels you want protected. Mention your usual parking and driving routine around Webster. We confirm the product, preparation, coverage, and price before installation.
Film options
Gloss
Clear protection that lets your original paint color and gloss take the spotlight. Choose targeted coverage or a more complete installation around the finish you want to preserve.
Satin
A smooth satin finish for a different expression of the same vehicle. Ask about full-body coverage and panel transitions for a consistent finish.
XPEL COLOR PPF
Change the look of your vehicle while helping protect its original paint. We offer XPEL COLOR paint protection film at our Friendswood studio. Review the available colors, then confirm your choice with a physical sample; screen colors are only a guide.
Screen colors are a guide. Confirm your choice with a physical XPEL sample. Color availability and installation pricing are confirmed with your quote.
Film suitability, availability, coverage, and installation pricing are confirmed with your quote.
Installation options
Choose the finish that fits your vehicle and expectations.
Everyday protection
Vehicle-specific patterns provide coverage for the panels in your chosen package. Edges are wrapped where the pattern allows, including applicable hood and inner fender edges.
The goal is dependable paint protection without the added cost of extensive custom edge work. A practical choice for daily-driven vehicles and owners seeking quality coverage.
A near-invisible finish
Custom adjustments, additional edge wrapping, and disassembly where necessary help make the film as discreet as possible. This approach provides approximately 5% more coverage than the Standard Kit, depending on the vehicle and panels.
The additional fitting and finishing take significantly longer. This is suited to exotic vehicles, track vehicles, and owners who prioritize the most discreet finish practical.
Both methods use professional film and careful preparation. Panel design and access determine what is practical; not every edge can be wrapped. We discuss visible edges and any disassembly before installation.
Paint preparation
We inspect the paint, previous repairs, existing film, and contamination before installation. Paint correction is not automatically required: PPF adhesive can conceal many fine swirl marks and light surface scratches without polishing first. The film conceals these marks rather than removing them.
Our preference is to preserve original clearcoat where polishing is unnecessary. Deeper scratches, chips, repaired panels, and failing paint need individual assessment and may remain visible. We explain any recommended preparation before agreeing to the work.
Our PPF process
Thoughtful preparation. Precise fitting. Personal attention.
Hand wash and decontaminate the surfaces so the film starts with a clean foundation.
Inspect the paint and discuss any preparation needed before covering existing imperfections.
Apply and align the film using the installation method and panel coverage selected for your vehicle.
Review the finish and edges, then walk you through curing and care before pickup.
After installation
Follow the curing and first-wash instructions supplied at pickup. Wash gently, remove contamination promptly, and avoid directing high-pressure water at film edges. Contact us if you notice lifting or damage rather than attempting a repair yourself.
A film-compatible ceramic coating can be considered for easier ongoing cleaning. It complements PPF rather than replacing the film’s physical protection. Ask us to identify the coated surfaces and suitable products in your proposal.
PPF for Webster
Start with the areas exposed to the way you drive. Front Bumper targets a high-impact surface. Partial Front adds the full hood; Full Front also includes the front fenders and mirrors. Highway extends coverage to lower panels and other exposed areas. Entire Vehicle is our most comprehensive option. We confirm the specific panel list for your vehicle.
Front Bumper starts at $749 and Partial Front starts at $1,499. Contact us for Full Front, Highway, or Entire Vehicle pricing. Your vehicle, film, preparation, and Standard Kit or Hybrid Custom installation method determine the final quote.
Front bumper coverage can be ready for same-day pickup, while a full-body Hybrid Custom installation can take up to 10 days. The actual schedule depends on your vehicle, coverage, and preparation. We confirm the estimated pickup date when scheduling at our Friendswood studio.
Usually, no. The film adhesive can conceal many fine swirls and light surface scratches while preserving clearcoat that would otherwise be removed through polishing. It does not repair chips, deep scratches, or failing paint. We inspect the vehicle and explain any preparation needed.
Yes. Discuss XPEL STEALTH for a satin finish or XPEL COLOR for a color transformation. Coverage, panel transitions, product availability, and the selected color or finish are confirmed before installation.
Clear film is designed to preserve the appearance of the paint, but seams and edges can be visible depending on panel shapes, lighting, and the installation method. Hybrid Custom includes more tailored fitting where practical; not every edge can be wrapped.
XPEL ULTIMATE PLUS and STEALTH have a manufacturer limited warranty covering specified film defects, subject to applicable terms. This is separate from protection against every impact or damage from misuse and improper care. Ask us for the written warranty details for your selected film.
They address different priorities. PPF provides a physical barrier on covered panels. Ceramic coating supports gloss and easier maintenance. You can choose either service or combine them with products suited to the surfaces being treated.
One dedicated studio
Serving Webster from our Friendswood studio. Speak with the team that will care for your vehicle.
Monday–Friday · 9:00 AM–5:00 PM
Saturday–Sunday · Closed
Already protected? Follow the service-specific care guidance supplied at pickup and explore our aftercare resource.
Founded in 2018. Dedicated to protecting what you drive.
Based in Friendswood, Texas, Bouley Detailing specializes in XPEL paint protection film, Gtechniq ceramic coatings, paint correction, and ceramic window tint. Quality over quantity. Personal attention. Relationships that last.
4402 Rex Road, STE J
Friendswood, TX 77546
Monday–Friday
9:00 AM–5:00 PM
Saturday–Sunday: Closed